Common Plumbing Concerns Most People Have

By  //  August 17, 2019

Every homeowner knows that plumbing issues, like malfunctioning flush or toilet, is really a nightmare. Plumbing preventive maintenance is usually overlooked, and once a problem arises, everyone is in a panic mode.

Every homeowner knows that plumbing issues, like malfunctioning flush or toilet, is really a nightmare. Plumbing preventive maintenance is usually overlooked, and once a problem arises, everyone is in a panic mode.

It’s best to know the most common plumbing concerns so you’ll be aware of how aggravating they are. By knowing, you’ll also understand the next steps if any of these happen to you.

Running Toilet

Running toilet is one of the most common plumbing concerns that can drive you nuts. You’ll hear water cycling on and off or running constantly. One cause of this problem is a flapper that’s shut or doesn’t seal. Water tends to seep from the tank around the flapper.

You can buy a new flapper to replace the old one to resolve the issue. Install the flapper according to the manufacturer’s instructions. However, if the problem persists, you have to call a professional plumber, like North Texas Custom Plumbing.

Dripping Faucets

You probably have experienced this common plumbing problem. Dripping faucets are commonly experienced. It’s rare to find a person who has not experienced it. It’s also one of the major causes of a sudden increase in water bill, because a single faucet wastes hundreds of gallons of water in a year.

A possible reason that causes faucets to drip is a stiff, worn, torn, or dislodged internal washer.

While an average householder can fix the problem, it requires using the correct tools, such as a crescent wrench, Allen wrench, flat screwdriver, and Phillip screwdriver. If you don’t have these tools and any background on how to do it, it’s best to hire a qualified plumbing professional.

Slow Draining Sink

Stay-at-home moms usually experience a headache when the kitchen sink slowly drains. This problem is usually caused by a blockage, like food remnants and congealed fat, that restricts water flow.

The blockage in a bathroom sink is likely caused by soap residue and knotted hair. You may need a plumber’s snake or a plunger to resolve the issues.

You can clear a clogged sink using a plunger. Also, you can pour down vinegar and baking soda or a chemical clog remover. If used repeatedly, chemicals can cause undue damage to the pipes. As much as possible, try another method.

Make sure to deal with this common plumbing problem immediately to avoid it from getting worse.

The blockage in a bathroom sink is likely caused by soap residue and knotted hair. You may need a plumber’s snake or a plunger to resolve the issues.

Clogged Toilet

When your toilet bowl fills up, and it doesn’t drain away, then you have a clog. It’s usually caused by a mixture of human waste and toilet paper. You can use a plunger to fix a clogged toilet. A drain auger or a sewer snake also helps loosen the blockage.

Contact a plumber immediately if you think an object, like a toy, is stuck on the toilet. By doing so, proper tools and equipment will be used, and avoid causing damage to your toilet bowl. A plumber in Frisco, TX, can help you handle any plumbing concerns including a clogged toilet.

Low Water Pressure

A problem with older homes is low water pressure. Worn, broken, or corroded leaking pipes can cause low water pressure. If the water trickles out of the tap instead of gushes, this is a sign of low water pressure.

Most often than not, low water pressure is caused by accumulated mineral deposits and sediment on aerators. To clean it, soak the aerator in a vinegar solution.

If the problem is with the shower, you can remove the residues by soaking the showerhead in vinegar. If it doesn’t work, you’ll have to replace it.

Faulty Water Heater

A faulty water heater occurs when the water suddenly gets cold when you’re in the shower. Several reasons can cause water heater failure. You might need to relight the pilot light or clean the sediment in the tank. Sometimes, the thermostat is at fault. Contact a plumber immediately if the problem persists.

Jammed Garbage Disposal

A jammed garbage disposal jam can be caused by operating it without water or disposal of inappropriate food items, such as cornhusks and potato skins. Also, foreign objects can cause jammed garbage disposal, like silverware. You can hit the reset button to fix it. However, you need to break the tools apart to fix the jam.

Conclusion

Dealing with a plumbing problem is a major source of stress. That’s why you have to address these concerns as soon as possible.

Avoid DIY troubleshooting if you don’t have any experience or plumbing background. It’ll just lead to the aggravation that would warrant more expensive repairs or replacement of your kitchen and bathroom fixtures.

Enjoy Space Coast Daily, Brevard County’s Best and Most Read MagazineRelated Story:
Enjoy Space Coast Daily, Brevard County’s Best and Most Read Magazine

CLICK HERE FOR BREVARD COUNTY NEWS