NASA’s Mars Perseverance Rover Gets Its Sample Handling System at Kennedy Space Center

By  //  March 20, 2020

Share on Facebook Share on Twitter Share on LinkedIn Share on Delicious Digg This Stumble This

Perseverance Rover weighs under 2,300 pounds

ABOVE VIDEO: NASA’s Mars 2020 rover is launching to the Red Planet in July or August 2020. It will land on Mars February 18, 2021.

(NASA) – With the launch period for NASA’s Mars Perseverance rover opening in a little less than four months, the six-wheeler is reaching significant pre-launch milestones almost daily at the Kennedy Space Center in Cape Canaveral, Florida.

The rover had some components removed prior to being shipped from NASA’s Jet Propulsion Laboratory in Southern California to the Cape in early February.

Last week, Perseverance’s assembly, test and launch operations team integrated two components that will play key roles in the acquisition, containment and eventual return to Earth of humanity’s first samples from another planet: the Adaptive Caching Assembly and the Bit Carousel.

The Bit Carousel contains the nine drill bits Perseverance will use to sample Martian rock and dust. Attached to the top front of the rover on March 7 and resembling a flying saucer, it also is the gateway for the samples to move into the belly of the rover for assessment and processing by the Adaptive Caching System.

NASA’s Mars 2020 rover, now called Perseverance, undergoes processing at a payload servicing facility at NASA’s Kennedy Space Center on Feb. 14, 2020. (NASA Image)

Installed on March 3, the Adaptive Caching Assembly consists of seven motors and more than 3,000 parts, all working in unison to collect samples from the surface of Mars.

A chief component of the assembly is the Sample Handling Arm, which will move sample tubes to the main robotic arm’s coring drill and then transfer the filled sample tubes into a space to be sealed and stored.

The installation and testing of the electrical wiring for both the Adaptive Caching Assembly and Bit Carousel were completed on March 11.

“With the addition of the Adaptive Caching Assembly and Bit Carousel, the heart of our sample collection system is now on board the rover,” said Matt Wallace, deputy project manager of the Mars 2020 mission at JPL.

“Our final but most crucial elements to install will be the sample tubes that will contain the first samples that will be brought from another planet back to Earth for analysis. We will keep these pristine until we integrate them in a couple of months.”

This illustration depicts NASA’s Perseverance rover operating on the surface of Mars. Perseverance will land at the Red Planet’s Jezero Crater a little after 3:40 p.m. EST (12:40 p.m. PST) on Feb. 18, 2021. (NASA Image)

Currently, the coronavirus has not impacted the Mars Perseverance rover launch schedule. Launch preparations are continuing.

The Perseverance rover is a robotic scientist weighing just under 2,300 pounds (1,043 kilograms). It will search for signs of past microbial life, characterize Mars’ climate and geology, collect samples for future return to Earth and help pave the way for human exploration of the Red Planet. No matter what day Perseverance launches during the launch period, which extends from July 17 through Aug. 5, it will alight on Mars’ Jezero Crater just after 3:40 p.m. EST (12:40 p.m. PST) on Feb. 18, 2021.

CLICK HERE FOR BREVARD COUNTY NEWS

Leave a Comment